Making and receiving calls
Manpack Transceiver 2110 series Reference Manual 223
Figure 43: The Calls In Log showing a NET call received (MIL-STD-188-141B
ALE option, 2110 only)
Up to 20 calls can be stored at a time and you can return any of these calls directly from
the log (see page 223, Returning a call from the Calls In Log).
The calls are listed in the order in which they were received with the most recent call at
the top of the list. If you receive two or more calls with the same call type and address
(and message or GPS position, if applicable), only the most recent call is kept in the log.
Displaying an entry in the Calls In Log
To display an entry in the Calls In Log:
1 Press CALL LOGS twice to open the Calls In Log.
The details of the last call received are displayed.
1 Scroll through the entries.
1 To display more information about an entry, press .
1 Scroll through the settings.
1 Press to return to the entry.
1 Press to close the Calls In Log and return to the screen from which you began.
Returning a call from the Calls In Log
To return a call from the Calls In Log:
1 Press CALL LOGS twice to open the Calls In Log.
1 Scroll to the call you want to return.
1 Do one of the following:
• Press CALL to use as many details from this call as possible.
• Hold CALL to review all details and/or select new ones.
NET call self address of sender/NET name
from which call was received
ALE selective message
received with NET call
icon
To Next Page
Loading...
Need help?
General
