Codan 2110 series - Set Command

Operating the transceiver from a computer
Manpack Transceiver 2110 series Reference Manual 439
set command
Use the set command to:
• display the current option(s) available
• change the setting of the GP input to lock or pause
When the GP port Q line input is asserted, scanning on the transceiver is stopped via a
lock or a pause, as specified in this command.
Syntax
set
set gp lock
set gp pause
where:
set displays the options available.
gp lock causes the Q line to lock the scan when the input is asserted.
gp pause causes the Q line to pause the scan when the input is asserted (default).