Hot key examples
Manpack Transceiver 2110 series Reference Manual 393
Example 6: making a call using a specific entry in the Address List
This example shows you how to create a macro to make a call using a specific entry in
the Address List.
When you run this macro, the transceiver:
• opens the Address List
• goes to the entry specified in the macro
• begins a call to the address specified in the entry
The timing with which this macro operates is Immediately. This means that the macro
begins the call without displaying the Address List entry first. The transceiver may,
however, prompt you for information about the call depending on the details supplied in
the entry.
To create this macro:
1 Press VIEW until the Address List is displayed.
1 Scroll to the entry you want the macro to call.
1 Hold to open the List Manager.
1 Scroll to Macros..., then press .
1 Scroll to Create macro, then press .
The transceiver asks you to select the action you want the macro to perform.
1 Scroll to Go to this entry, then press .
The transceiver asks you to select the timing with which the macro operates.
1 Scroll to Immediately, then press .
1 Press the key to which you want to assign the new macro.
1 Scroll to the macro you want to have in the list immediately after the new macro,
then press .
1 Type a name for the macro, then press .
The macro is created and assigned to the key, and the List Manager remains open.
To Next Page
Loading...
Need help?
General
