VP-116 voice encryptor option
Manpack Transceiver 2110 series Reference Manual 311
Requesting a public encryption key
To request a public encryption key:
1 Hold SEC in either Clear or Private Mode.
1 Press
*
to request a public key exchange.
If you want to cancel the public key exchange, press .
Stations receiving the public key request display the following screen.
1 At a receiving station, press to start the public key exchange.
The first station to respond in this way exchanges the public key with the initiating
station. The exchange may take up to 40 seconds.
When the public key exchange is complete, both stations display the following
screen.
Both stations either enter or remain in Private Mode using the public key.