The Phone Link List
Manpack Transceiver 2110 series Reference Manual 167
Programming the Phone Link List
Creating a phone link
To create a phone link:
1 Press until Main Menu is displayed.
1 Scroll to Phone Link, then press .
1 Use the List Manager to create an entry (for help see page 113, Creating an entry in
a list and page 72, Entering and editing text).
1 Enter the setting information provided in the following table as required, then
press to enter the information.
The new phone link is created and the List Manager remains open.
1 If you want to view the phone link you have created, press to close the List
Manager.
NOTE
In the following discussion, you must log in as administrator to see the
Phone Link List (see page 128, Logging in to admin level from user level).
If this prompt is
displayed...
Do this...
Address? • enter the address of the phone link station, or
• leave the address empty if you want to be
prompted to choose an address when you make
the call
Network? • select the network in which you want to use this
phone link, or
• select <blank> if you want to be prompted to
select a network when you make the call
Channel/Mode? • select the channel/mode you want to use to make
the call, or
• select <blank> if you want to be prompted to
select a channel/mode when you make the call
To Next Page
Loading...
Need help?
General
