Hot keys
342 Manpack Transceiver 2110 series Reference Manual
Table 41: Macro options
Option Setting Select this option if you want the macro to...
Macro action? Go to this entry Display the list or entry you were on when you created the macro.
Go to marker Display the list or entry on which a marker is set.
Go to this chan Select the channel you were on when you created the macro.
Display chan Display the currently selected channel.
Go to this freq Select the free-tune frequency and cursor position you were on when
you created the macro.
Display freq Display the currently selected frequency in the Free Tune screen with
the cursor position you were on when you created the macro.
Set this value Change the value in the setting you were on to the value that was
displayed when you created the macro.
For example, if you entered a value of 100 in the setting, then began
creating the macro, the macro would set the value to 100.
Set next value Go to the setting you were on when you created the macro, then select
the next possible value for the setting.
For example, if the possible values for the setting are Off and On, and
prior to running the macro the value was set to Off, the macro would
set the value to On.
Display value Display the value in the setting you were on when you created the
macro.
To Next Page
Loading...
Need help?
General
