Operating the transceiver from a computer
Manpack Transceiver 2110 series Reference Manual 453
SELCALL: <channel>, <caller
address>, <self address>,
<date> <time>
A Selective call has been received.
SELFID-LIST: <self address>[,
<self address>]
The list of current self addresses used by the CICS
interface.
SIDEBAND: AM|LSB|USB The sideband for the current channel.
SOUNDING: FAILED The ALE sounding operations have been aborted before
completion.
SOUNDING: FINISHED The ALE sounding operations have been completed.
SOUNDING: OFF The ALE sounding operations have been disabled.
SOUNDING: ON The ALE sounding operations have been enabled.
SOUNDING: STARTED <self
address>@<network>
The ALE sounding operations have commenced.
STATUS-ACK: <channel>, <caller
address>, <self address>,
<date> <time>, "<message>"
An acknowledgment response for a Get Status call has
been requested and sent.
STATUS-CALL: <channel>, <caller
address>, <self address>,
<date> <time>, "<message>"
A request message for a Get Status call has been received.
STATUS-CALL-ACK: <channel>,
<caller address>, <self
address>, <date> <time>,
"<message>"
An acknowledgment response for a Get Status call has
been requested and sent.
STATUSTIME: <n> The current timeout value, where n is the amount of time
(in seconds) the receiving station has to respond to a Get
Status call.
TEL-CALL: <channel>, <caller
address>, <self address>,
<date> <time>, <telephone
number>|DISCONNECTED
A Phone call has been received or disconnected.
Table 69: CICS response messages (cont.)
Response message Description
To Next Page
Loading...
Need help?
General
