Datalogic Magellan 1500i - UPC;EAN Stitch Unlike Label Halves

ENTER/EXIT PROGRAMMING MODE
162 MAGELLAN™ 1500I
UPC/EAN Stitch Unlike Label Halves
This setting enables the stitching of two UPC‐A/EAN‐13 label halves together that may have
different characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
054200(CR)
UPC/EAN Stitch Unlike Label Halves = Disable
054201(CR)
UPC/EAN Stitch Unlike Label Halves = Enable
DEFAULT