Datalogic Magellan 1500i - Databar Expanded; Databar Expanded Enable

ENTER/EXIT PROGRAMMING MODE
188 MAGELLAN™ 1500I
DATABAR EXPANDED
DataBar Expanded Enable
Enables/disables the ability of the scanner to decode DataBar Expanded labels.
NOTE
This value-added feature is a factory-programmed option. Con-
tact your dealer for information about upgrading your system to
include this advanced capability.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
04D100(CR)
DataBar Expanded = Disable
04D101(CR)
DataBar Expanded = Enable
DEFAULT