Datalogic Magellan 1500i - Picture Retrieval Timeout

IMAGING FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 59
Picture Retrieval Timeout
This feature sets the amount of time after the picture retrieval label is sent to the POS that
the scanner will allow subsequent picture taking requests via button press.
NOTE
042300(CR)
If set to 0, the picture retrieval timeout will not be used and a picture
will remain accessible until another is taken or the scanner is reset.
Picture Retrieval Timeout = 0
042301(CR)
Picture Retrieval Timeout = 1 second
042302(CR)
Picture Retrieval Timeout = 2 seconds
042303(CR)
Picture Retrieval Timeout = 3 seconds
042304(CR)
Picture Retrieval Timeout = 4 seconds
042305(CR)
Picture Retrieval Timeout = 5 seconds
DEFAULT