Datalogic Magellan 1500i - Case Conversion

CASE CONVERSION ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 123
CASE CONVERSION
This option can change the case of all alphabetic characters in scanned barcode data to
upper or lower case.
NOTE
Case conversion affects ONLY scanned barcode data, and does not affect
Label ID, Prefix, Suffix, or other appended data.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan barcode for the desired option below. You’ll need to cover any unused barcodes
on
this and the facing page to ensure that the scanner reads only the barcode you
intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
033100(CR)
Case Conversion = No Case Conversion
033101(CR)
Case Conversion = Upper Case
033102(CR)
Case Conversion = Lower Case
DEFAULT