Datalogic Magellan 1500i - USB Keyboard Caps Lock State

ENTER/EXIT PROGRAMMING MODE
84 MAGELLAN™ 1500I
USB Keyboard Caps Lock State
This feature specifies the format in which the scanner sends character data.
Selections are:
Caps Lock OFF: Send character data in normal format
Caps Lock ON: Send character data in reverse case
Shift Lock Mode: This setting results in a Caps Lock OFF functionality.
Caps Lock Compensation Mode: This only applies to USB Keyboard. For other interfaces,
this setting results in a Caps Lock OFF functionality.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the desired selection from the barcodes below. You’ll need to cover any unused
bar
codes on this and the facing page to ensure that the scanner reads only the bar‐
code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
030400(CR)
USB Keyboard Caps Lock State =
Caps Lock OFF
030401(CR)
USB Keyboard Caps Lock State =
Caps Lock ON
030402(CR)
USB Keyboard Caps Lock State =
Shift Lock Mode
030403(CR)
USB Keyboard Caps Lock State =
Caps Lock Compensation
DEFAULT