Datalogic Magellan 1500i - USB Keyboard Additional Interface Options

USB INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 87
USB Keyboard Additional Interface Options
See Appendix E, Keyboard Function Key Mappings for more information.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any unused bar
c
odes on this and the facing page to ensure that the scanner reads only the bar code
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar c
ode.
055048CR)
USB Keyboard Interface Option 1 =
Use Rev C function table
055040(CR)
USB Keyboard Interfaces Option 2 =
Use Rev D function table
DEFAULT