Datalogic Magellan 1500i - Royal Mail; Royal Mail Enable

ROYAL MAIL ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 285
ROYAL MAIL
Royal Mail Enable
Enables/disables the ability of the scanner to decode Royal Mail labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
052300(CR)
Royal Mail = Disable
052301(CR)
Royal Mail = Enable
DEFAULT