Datalogic Magellan 1500i - USB OEM Additional Interface Options

USB INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 89
USB OEM Additional Interface Options
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
Complete the programming sequence by scanning the Enter/Exit Programming Mode bar‐
code
055101(CR)
USB OEM Interfaces Option2 =
Enable scanner at first enumeration after BusReset
055100(CR)
USB OEM Interfaces Option2 =
Disable scanner at first enumeration after BusReset
DEFAULT