Datalogic Magellan 1500i - EAN-8 Stitch Unlike Label Halves

EAN-8 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 153
EAN-8 Stitch Unlike Label Halves
This setting enables the stitching of two EAN‐8 label halves together that may have differ‐
ent characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
054500(CR)
EAN-8 Stitch Unlike Label Halves = Disable
054501(CR)
EAN-8 Stitch Unlike Label Halves = Enable
DEFAULT