Datalogic Magellan 1500i - EAN Two Label Combined Transmission

OTHER UPC/EAN OPTIONS ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 169
EAN Two Label Combined Transmission
Enables/disables the transmitting of an EAN two label pair as one label.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
02E200(CR)
EAN Two Label Combined Transmission = Disable
02E201(CR)
EAN Two Label Combined Transmission = Enable
DEFAULT