Datalogic Magellan 1500i - Accelerometer Detect Threshold

ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 37
Accelerometer Detect Threshold
Sets acceleration threshold that must be exceeded for an InMotionEvent to be generated.
NOTE
Setting the Reject Threshold (
page 38) to LOWEST while this feature is set to
HIGHEST will result in the scanner rejecting all motion inputs.
Accelerometer Detect Threshold = Lowest
Accelerometer Detect Threshold = Low
Accelerometer Detect Threshold = Medium
Accelerometer Detect Threshold = High
Accelerometer Detect Threshold = Highest
150600(CR)
150601(CR)
DEFAULT
150602(CR)
150603(CR)
150604(CR)