Datalogic Magellan 1500i - Databar Limited EAN128 Emulation Enable

DATABAR LIMITED ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 187
DataBar Limited EAN128 Emulation Enable
Enables/disables GS1‐EAN128 emulation for GS1 Databar Limited.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar
code.
DEFAULT
036300(CR)
Databar Limited EAN128 Emulation = disable
036301(CR)
Databar Limited EAN128 Emulation = enable