Datalogic Magellan 1500i - Expand EAN-8 to EAN-13

EAN-8 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 147
Expand EAN-8 to EAN-13
Enables/disables expansion of EAN/JAN‐8 labels to EAN/JAN‐13.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
021B00(CR)
Expand EAN-8 to EAN-13 = Disable
021B01(CR)
Expand EAN-8 to EAN-13 = Enable
DEFAULT