Datalogic Magellan 1500i - Coupon Label Priority Timer

ENTER/EXIT PROGRAMMING MODE
128 MAGELLAN™ 1500I
Coupon Label Priority Timer
This feature sets the duration of the UPCA / DataBar coupon label priority timer.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
y
ou intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
bar
code.
037F0A(CR)
Coupon Label Priority Timer = 0.1 Seconds
037F14(CR)
Coupon Label Priority Timer = 0.2 Seconds
037F1E(CR)
Coupon Label Priority Timer = 0.3 Seconds
037F28CR)
Coupon Label Priority Timer = 0.4 Seconds
037F32(CR)
Coupon Label Priority Timer = 0.5 Second
037F64CR)
Coupon Label Priority Timer = 1 Second
DEFAULT