A
B
C
D
E
F
G
H
L
M
N
P
section
D 5
70 1098/1098S - M.Y. 2007 - edition 00
Use and maintenance
Remove the tool and refit the pressure switch (19) along with its seal. Tighten the pressure switch to the specified torque
(Sect. C 3, Engine torque settings).
Reconnect the electrical system connector (A) to the pressure switch.
Disconnect the DDS tester.
Refit the RH side fairing (Sect. E 2).
A
19
To Next Page