A
B
C
D
E
F
G
H
L
M
N
P
section
E 3
231098/1098S - M.Y. 2007 - edition 00
Fairings
Check that threaded inserts (13) are present on the seat cowling (6) and on side panels (9) and (10).
Check that the rubber mountings (20) are present on the heat shield (19). Offer the shield (19) up to the subframe and insert the
wiring (D) in the aperture (E).
Refitting the seat cowling heat shield
Refit the heat shield (19) to the flanges (21). Position the support (17) and tighten the nuts (18). Refit the lower front bolts (11)
securing the heat shield (19). Tighten the bolts (11) and the nuts (18) to the specified torque (Sect. C 3).
Refit the exhaust silencers and the relative clamps as indicated in Sect. L 8.
13
6
9
13
20
E
D
19
18
18
17
19
11
21
To Next Page
Loading...
