A
B
C
D
E
F
G
H
L
M
N
P
section
G 5
431098/1098S - M.Y. 2007 - edition 00
Wheels - Suspensions - Brakes
To change the bearings, proceed as follows.
From the right-hand side of the swingarm, remove the spacers (21) and (12) and the two bushes (22) from the left-hand side.
Remove the ball bearings (19), seal rings (23) and roller bearings (25) with a suitable punch and press. Support the swingarm and
take care not to damage the bearing bores.
Important
Once disturbed, the bearings (19), seal rings (23) and roller bearings (25) must not be reinstalled.
12
19
20
19
21
22
23
25
25
23
22
To Next Page
Loading...
