A
B
C
D
E
F
G
H
L
M
N
P
section
N 8
1811098/1098S - M.Y. 2007 - edition 00
Engine
Apply threadlocker to the bolts (7).
Tighten the two retaining bolts (7) of the centre cap (6) over the end of the crankshaft to the specified torque (Sect. C 3).
Reconnect the alternator wiring to the main wiring loom (A).
Operation Section reference
Refit the water pump-radiator hose N 3.3
Refit the pump-cylinder hoses N 5
Fit the clutch pushrod F 10
Refit the sprocket cover G 7
Top up the engine oil D 4
6
7
A
A
To Next Page