Ducati 1098 2007 - 4 - Lights and indicating devices

A
B
C
D
E
F
G
H
L
M
N
P
section
P 4
591098/1098S - M.Y. 2007 - edition 00
Electric system
4 - Lights and indicating devices
Changing light bulbs
Changing the headlight bulbs
Before replacing a burnt out light bulb, ensure that the replacement bulb you intend to fit has the same voltage and power rating
as specified for the lighting device in question (Sect. C 1.1, Lights/instrument panel).
Warning
The halogen light bulbs in the headlight become hot when switched on and remain hot for some time after they are switched
off. Allow bulbs to cool before replacing them.
The position of the light bulbs in the headlight is as indicated below: low beam (LO), high beam (HI) and parking light (A).
To access the healight bulbs, remove the air intake covers of the headlight shell (Sect. E 1).
High beam bulb (HI):
Remove the cover (1) by pressing the tab (B).
A
L HI
B
1
1
WWW.PlanDeGraissage.ORG