A
B
C
D
E
F
G
H
L
M
N
P
section
P 4
60 1098/1098S - M.Y. 2007 - edition 00
Electric system
Remove the bulb lead (2) and remove the bulb from the lead.
Notes
Do not touch the transparent part of the bulb with your fingers, this will darken it and cause a loss of brightness.
Low beam bulb (LO):
Repeat the operations for removal of the high beam bulb, but this time working on the right-hand side of the motorcycle.
Parking lights (A):
To replace the parking light withdraw the bulb holder (3) from the rear of the headlight. Remove the bulbs and replace them.
Refitting the bulbs
After replacing the bulbs as required, reconnect the bulb holders to the lights assembly.
Reposition the covers (1) and secure them to the headlight assembly with the clips (B).
2
3
B
1
To Next Page