A
B
C
D
E
F
G
H
L
M
N
P
section
P 8
104 1098/1098S - M.Y. 2007 - edition 00
Electric system
Programming the immobilizer
This instrument panel function enables programming of the Immobilizer System.
Notes
Only 2 keys may be programmed.
insert KEY 1 (one of the two black keys) and turn the ignition switch from Off to On;
within 3 seconds turn the ignition switch from On to Off;
within 15 seconds insert KEY 2 (the other black key) and turn the ignition switch from Off to On;
within 3 seconds turn the ignition switch from On to Off;
within 15 seconds, insert again KEY X (either Key 1 or Key 2) and turn the ignition switch from Off to ON.
If the procedure was successful, the instrument panel will display the message “PROG” steadily for 3 seconds before returning
to normal display mode.
To Next Page
Loading...
