Keithley DMM7510 Reference Manual

Section
3: Functions and features Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
3-90 DMM7510-901-01 Rev. B / May 2015
Trigger block summary
Front-panel
icon
SCPI command
TSP command
Block description
Not applicable
:TRIGger:BLOCk:LIST? (on page 6-198)
trigger.model.getblocklist() (on page 8-284
)
This returns the
settings for all
trigger model
blocks
:TRIGger:BLOCk:BRANch:ALWays (on page 6-181)
trigger.model.setblock() — trigger.BLOCK_BRANCH_ALWAYS
(on
page 8-303)
This defines a
trigger model block
that always goes to
a specific block
:TRIGger:BLOCk:BRANch:COUNter (on page 6-182)
trigger.model.setblock() — trigger.BLOCK_BRANCH_COUNTER
(on
page 8-304)
This defines a
trigger model block
that branches to a
specified block a
specified number of
times
Not applicable :TRIGger:BLOCk:BRANch:COUNter:COUNt? (on page 6-183)
trigger.model.getbranchcount() (on page 8-285
)
This returns the
count value of the
trigger model
counter block
:TRIGger:BLOCk:BRANch:COUNter:RESet (on page 6-183)
trigger.model.setblock() — trigger.BLOCK_RESET_BRANCH_COUNT
(on page 8-324)
This creates a
block in the trigger
model that resets a
branch counter to 0
:TRIGger:BLOCk:BRANch:DELTa (on page 6-184)
trigger.model.setblock() — trigger.BLOCK_BRANCH_DELTA
(on page
8-305)
This defines a
trigger model block
that goes to a
specified block if
the difference of
two measurements
meets preset
criteria
:TRIGger:BLOCk:BRANch:EVENt (on page 6-185
)
trigger.model.setblock() — trigger.BLOCK_BRANCH_ON_EVENT
(on
page 8-309)
This branches to a
specified block
when a specified
trigger event occurs
:TRIGger:BLOCk:BRANch:LIMit:CONStant (on page 6-187)
trigger.model.setblock() —
trigger.BLOCK_BRANCH_LIMIT_CONSTANT (on page 8-306)
This defines a
trigger model block
that goes to a
specified block if a
measurement
meets preset
criteria
:TRIGger:BLOCk:BRANch:LIMit:DYNamic (on page 6-188
)
trigger.model.setblock() —
trigger.BLOCK_BRANCH_LIMIT_DYNAMIC (on page 8-308)
This defines a
trigger model block
that goes to a
specified block in
the trigger model if
a measurement
meets user-defined
criteria

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English