7: Introduction to TSP commands Model DMM7510 7½ Digit Graphical Sampling Multimeter
7-38 DMM7510-901-01 Rev. B / May 2015
4. In the Name box, enter the name of your new run configuration.
5. Click the Browse button next the Project box.
6. Select a project from the list of available projects
7. Click OK.
Figure 157: Project Selection dialog box
The TSP files for the selected project are added to the Available Project Files list on the Main tab.
Figure 158: Available files for selected project
To Next Page
Loading...
Need help?
General
