Common (*) Commands 5
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 115
Return Format <status><NL>
<status> ::= 0,..,255; an integer in NR1 format.
See Also • "Introduction to Common (*) Commands" on page 109
• "*ESE (Standard Event Status Enable)" on page 112
• "*OPC (Operation Complete)" on page 118
• "*CLS (Clear Status)" on page 111
• ":SYSTem:ERRor" on page 551
Reading the Standard Event Status Register clears it. High or 1 indicates the bit is true.
To Next Page
Loading...
