Keysight Technologies InfiniiVision DSOX1204G

680 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
29 :WGEN Commands
:WGEN:MODulation:AM:FREQuency
(see page 798)
Command Syntax
:WGEN:MODulation:AM:FREQuency <frequency>
<frequency> ::= modulating waveform frequency in Hz in NR3 format
The :WGEN:MODulation:AM:FREQuency command specifies the frequency of the
modulating signal.
Query Syntax
:WGEN:MODulation:AM:FREQuency?
The :WGEN:MODulation:AM:FREQuency? query returns the frequency of the
modulating signal.
Return Format
<frequency><NL>
<frequency> ::= modulating waveform frequency in Hz in NR3 format
See Also • ":WGEN:MODulation:AM:DEPTh" on page 679
• ":WGEN:MODulation:FM:DEViation" on page 681
• ":WGEN:MODulation:FM:FREQuency" on page 682
• ":WGEN:MODulation:FSKey:FREQuency" on page 683
• ":WGEN:MODulation:FSKey:RATE" on page 684
• ":WGEN:MODulation:FUNCtion" on page 685
• ":WGEN:MODulation:FUNCtion:RAMP:SYMMetry" on page 686
• ":WGEN:MODulation:STATe" on page 688
• ":WGEN:MODulation:TYPE" on page 689