244 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
13 :DVM Commands
:DVM:ENABle
(see page 798)
Command Syntax
:DVM:ENABle <setting>
<setting> ::= {{OFF | 0} | {ON | 1}}
The :DVM:ENABle command turns the digital voltmeter (DVM) analysis feature on
or off.
Query Syntax
:DVM:ENABle?
The :DVM:ENABle? query returns a flag indicating whether the digital voltmeter
(DVM) analysis feature is on or off.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":DVM:SOURce" on page 247
• ":DVM:MODE" on page 246
• ":DVM:ARANge" on page 242
To Next Page
Loading...
