570 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
25 :SYSTem Commands
:SYSTem:USB:EJECt
(see page 798)
Command Syntax
:SYSTem:USB:EJECt {ALL | <usb_path>}
<usb_path> ::= path of USB storage device
The :SYSTem:USB:EJECt command ejects connected USB storage devices.
When the ALL parameter is given, the command will dismount/eject all connected
USB storage devices.
The paths of connected USB storage devices are returned by the
:SYSTem:USB:PLISt? query.
See Also • ":SYSTem:USB:PLISt" on page 571
You must "eject" a USB mass storage device before unplugging it; otherwise, the device will
be marked as needing repair when connecting to a computer with the Windows operating
system (even though there are no harmful effects to the device).
To Next Page
Loading...
