:WGEN Commands 29
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 695
:WGEN:RST
(see page 798)
Command Syntax
:WGEN:RST
The :WGEN:RST command restores the waveform generator factory default
settings (1 kHz sine wave, 500 mVpp, 0 V offset).
See Also • "Introduction to :WGEN Commands" on page 671
• ":WGEN:FUNCtion" on page 673
• ":WGEN:FREQuency" on page 672
To Next Page
Loading...
