414 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
21 :MTESt Commands
:MTESt:DATA
(see page 798)
Command Syntax
:MTESt:DATA <mask>
<mask> ::= binary block data in IEEE 488.2 # format.
The :MTESt:DATA command loads a mask from binary block data. These are the
data bytes found in a *.msk file.
Query Syntax
:MTESt:DATA?
The :MTESt:DATA? query returns a mask in binary block data format. The format
for the data transmission is the # definite-length format defined in the IEEE 488.2
specification.
Return Format
<mask><NL>
<mask> ::= binary block data in IEEE 488.2 # format
See Also • ":SAVE:MASK[:STARt]" on page 450
• ":RECall:MASK[:STARt]" on page 436
To Next Page
Loading...
