172 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
7 :ABUS Commands
:ABUS:CLEar
(see page 798)
Command Syntax
:ABUS:CLEar
The :ABUS:CLEar command excludes all of the analog channels from the selected
bus definition.
See Also • "Introduction to :ABUS Commands" on page 168
• ":ABUS:BIT<m>" on page 169
• ":ABUS:BITS" on page 170
• ":ABUS:DISPlay" on page 173
• ":ABUS:LABel" on page 174
• ":ABUS:MASK" on page 175
To Next Page
Loading...
