:TRIGger Commands 27
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 621
:TRIGger:SHOLd:TIME:SETup
(see page 798)
Command Syntax
:TRIGger:SHOLd:TIME:SETup <time>[suffix]
<time> ::= floating-point number in NR3 format
[suffix] ::= {s | ms | us | ns | ps}
The :TRIGger:SHOLd:TIME:SETup command sets the setup time.
Query Syntax
:TRIGger:SHOLd:TIME:SETup?
The :TRIGger:SHOLd:TIME:SETup? query returns the currently specified setup
time.
Return Format
<time><NL>
<time> ::= floating-point number in NR3 format
See Also • "Introduction to :TRIGger Commands" on page 585
To Next Page
Loading...
