Keysight Technologies InfiniiVision DSOX1204G

433
Keysight InfiniiVision DSOX1204A/G Oscilloscopes
Programmer's Guide
22 :RECall Commands
Recall previously saved oscilloscope setups, reference waveforms, and masks.
Introduction to
:RECall Commands
The :RECall subsystem provides commands to recall previously saved oscilloscope
setups, reference waveforms, and masks.
Reporting the Setup
Table 67 :RECall Commands Summary
Command Query Options and Query Returns
:RECall:FILename
<base_name> (see
page 435)
:RECall:FILename?
(see page 435)
<base_name> ::= quoted ASCII
string
:RECall:MASK[:STARt]
[<file_spec>] (see
page 436)
n/a <file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-3; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
:RECall:PWD
<path_name> (see
page 437)
:RECall:PWD? (see
page 437)
<path_name> ::= quoted ASCII
string
:RECall:SETup[:STARt]
[<file_spec>] (see
page 438)
n/a <file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-9; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
:RECall:WMEMory<r>[:S
TARt] [<file_name>]
(see page 439)
n/a <r> ::= 1-2 in NR1 format
<file_name> ::= quoted ASCII
string
If extension included in file
name, it must be ".h5".