620 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
27 :TRIGger Commands
:TRIGger:SHOLd:TIME:HOLD
(see page 798)
Command Syntax
:TRIGger:SHOLd:TIME:HOLD <time>[suffix]
<time> ::= floating-point number in NR3 format
[suffix] ::= {s | ms | us | ns | ps}
The :TRIGger:SHOLd:TIME:HOLD command sets the hold time.
Query Syntax
:TRIGger:SHOLd:TIME:HOLD?
The :TRIGger:SHOLd:TIME:HOLD? query returns the currently specified hold time.
Return Format
<time><NL>
<time> ::= floating-point number in NR3 format
See Also • "Introduction to :TRIGger Commands" on page 585
To Next Page
Loading...
