322 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
18 :HARDcopy Commands
:HARDcopy:PALette
(see page 798)
Command Syntax
:HARDcopy:PALette
<palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser printers, so
the COLor option is not available when connected to laser printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also • "Introduction to :HARDcopy Commands" on page 312
• ":HARDcopy:STARt" on page 324
• ":HARDcopy:FACTors" on page 315
• ":HARDcopy:LAYout" on page 318
• ":HARDcopy:FFEed" on page 316
• ":HARDcopy:INKSaver" on page 317
To Next Page
Loading...
Need help?
General
