:HARDcopy Commands 18
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 321
:HARDcopy:NETWork:SLOT
(see page 798)
Command Syntax
:HARDcopy:NETWork:SLOT <slot>
<slot> ::= {NET0 | NET1}
The :HARDcopy:NETWork:SLOT command selects the network printer slot used
for the address and apply commands. There are two network printer slots to
choose from.
Query Syntax
:HARDcopy:NETWork:SLOT?
The :HARDcopy:NETWork:SLOT? query returns the currently selected network
printer slot.
Return Format
<slot><NL>
<slot> ::= {NET0 | NET1}
See Also • "Introduction to :HARDcopy Commands" on page 312
• ":HARDcopy:NETWork:APPLy" on page 320
• ":HARDcopy:NETWork:ADDRess" on page 319
To Next Page
Loading...
Need help?
General
