:RECall Commands 22
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 439
:RECall:WMEMory<r>[:STARt]
(see page 798)
Command Syntax
:RECall:WMEMory<r>[:STARt] [<file_name>]
<r> ::= 1-2 in NR1 format
<file_name> ::= quoted ASCII string
The :RECall:WMEMory<r>[:STARt] command recalls a reference waveform.
See Also • "Introduction to :RECall Commands" on page 433
• ":RECall:FILename" on page 435
• ":SAVE:WMEMory[:STARt]" on page 460
If a file extension is provided as part of a specified <file_name>, it must be ".h5".
To Next Page
Loading...
