Keysight Technologies InfiniiVision DSOX1204G User Manual

464 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
24 :SBUS<n> Commands
:SBUS<n>:DISPlay
(see page 798)
Command Syntax
:SBUS<n>:DISPlay <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :SBUS<n>:DISPlay command turns displaying of the serial decode bus on or
off.
Query Syntax
:SBUS<n>:DISPlay?
The :SBUS<n>:DISPlay? query returns the current display setting of the serial
decode bus.
Return Format
<display><NL>
<display> ::= {0 | 1}
Errors • "-241, Hardware missing" on page 759
See Also • "Introduction to :SBUS<n> Commands" on page 461
• ":CHANnel<n>:DISPlay" on page 207
• ":VIEW" on page 165
• ":BLANk" on page 142
• ":STATus" on page 162
NOTE
This command is only valid when a serial decode option has been licensed.

Keysight Technologies InfiniiVision DSOX1204G Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204G
Category	Test Equipment
Language	English