664 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
28 :WAVeform Commands
:WAVeform:XREFerence
(see page 798)
Query Syntax
:WAVeform:XREFerence?
The :WAVeform:XREFerence? query returns the x-reference value for the currently
specified source. This value specifies the index of the data point associated with
the x-origin data value. In this product, the x-reference point is the first point
displayed and XREFerence is always 0.
Return Format
<value><NL>
<value> ::= x-reference value=0in32-bit NR1 format
See Also • "Introduction to :WAVeform Commands" on page 635
• ":WAVeform:PREamble" on page 649
• ":WAVeform:XORigin" on page 663
Example Code • "Example Code" on page 650
To Next Page
Loading...
