444 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
23 :SAVE Commands
:SAVE:FILename
(see page 798)
Command Syntax
:SAVE:FILename <base_name>
<base_name> ::= quoted ASCII string
The :SAVE:FILename command specifies the source for any SAVE operations.
Query Syntax
:SAVE:FILename?
The :SAVE:FILename? query returns the current SAVE filename.
Return Format
<base_name><NL>
<base_name> ::= quoted ASCII string
See Also • "Introduction to :SAVE Commands" on page 442
• ":SAVE:IMAGe[:STARt]" on page 445
• ":SAVE:SETup[:STARt]" on page 453
• ":SAVE:WAVeform[:STARt]" on page 454
• ":SAVE:PWD" on page 452
• ":RECall:FILename" on page 435
This command specifies a file's base name only, without path information or an extension.
To Next Page
Loading...
