560 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
25 :SYSTem Commands
:SYSTem:RLOGger
(see page 798)
Command Syntax
:SYSTem:RLOGger <setting>[,<file_name>[,<write_mode>]]
<setting> ::= {{0 | OFF} | {1 | ON}}
<file_name> ::= quoted ASCII string
<write_mode> ::= {CREate | APPend}
The :SYSTem:RLOGger command enables or disables remote command logging,
optionally specifying the log file name and write mode.
See Also • ":SYSTem:RLOGger:DESTination" on page 561
• ":SYSTem:RLOGger:DISPlay" on page 562
• ":SYSTem:RLOGger:FNAMe" on page 563
• ":SYSTem:RLOGger:STATe" on page 564
• ":SYSTem:RLOGger:TRANsparent" on page 565
• ":SYSTem:RLOGger:WMODe" on page 566
To Next Page
Loading...
