:TRIGger Commands 27
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 615
:TRIGger:PATTern:QUALifier
(see page 798)
Command Syntax
:TRIGger:PATTern:QUALifier <qualifier>
<qualifier> ::= ENTered
The :TRIGger:PATTern:QUALifier command qualifies when the trigger occurs.
In the InfiniiVision DSOX1204A/G oscilloscopes, the trigger always occurs when
the pattern is entered.
Query Syntax
:TRIGger:PATTern:QUALifier?
The :TRIGger:PATTern:QUALifier? query returns the trigger duration qualifier.
Return Format
<qualifier><NL>
See Also • "Introduction to :TRIGger Commands" on page 585
To Next Page
Loading...
