:TIMebase Commands 26
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 579
:TIMebase:SCALe
(see page 798)
Command Syntax
:TIMebase:SCALe <scale_value>
<scale_value> ::= time/div in seconds in NR3 format
The :TIMebase:SCALe command sets the horizontal scale or units per division for
the main window.
Query Syntax
:TIMebase:SCALe?
The :TIMebase:SCALe? query returns the current horizontal scale setting in
seconds per division for the main window.
Return Format
<scale_value><NL>
<scale_value> ::= time/div in seconds in NR3 format
See Also • "Introduction to :TIMebase Commands" on page 574
• ":TIMebase:RANGe" on page 577
• ":TIMebase:WINDow:SCALe" on page 583
• ":TIMebase:WINDow:RANGe" on page 582
To Next Page
Loading...
