:WMEMory<r> Commands 30
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 703
:WMEMory<r>:CLEar
(see page 798)
Command Syntax
:WMEMory<r>:CLEar
<r> ::= 1-2 in NR1 format
The :WMEMory<r>:CLEar command clears the specified reference waveform
location.
See Also • Chapter 30, “:WMEMory<r> Commands,” starting on page 701
• ":WMEMory<r>:SAVE" on page 706
• ":WMEMory<r>:DISPlay" on page 704
To Next Page
Loading...
